page 1 of 3 level 10 (lo power +10 dbm) 400 to 900 mhz frequency mixer ADE-92LH+ the big deal product overview key features case style: cd636 ? excellent ip3: +24dbm with reduced lo power (+10dbm) ? high lo-rf isolation across the entire band ? low cost, miniature size the ADE-92LH+ is passive double balanced mixer featuring a fet quad in a ring confguration providing high dynamic range performance in a small, low cost, rohs-compliant package. the ADE-92LH+ provides rf/lo response from 400 to 900 mhz and if response from dc to 150 mhz. it is especially useful in systems where cost and performance are critical, such as gsm cellular system applications. this mixer is ideal for upconverter and downconverter applications and does not require external matching components or dc power. feature advantages high ip3, +24 dbm typ. with reduced lo power requirement. allows for improved dynamic range, a critical factor in receiver applications. low conversion loss, 7 db typ. enables lower nf front ends, which can improve system sensitivity. high lo to rf isolation, 40 db typ. reduced levels of unwanted responses that can interfere with system performance. broadband matching the if port vswr is less than 1.6 to 1 over the specifed frequency range, which simplifes impedance matching with adjoining components. insensitive to lo power level variations allows the use of an lo amplifer with less stringent gain fatness, enabling the use of lower cost amplifers. small package 0.310 x 0.220 x 0.162 enables high density packaging. iso 9001 iso 14001 as 9100 certified mini-circuits ? p.o. box 350166, brooklyn, new york 11235-0003 (718) 934-4500 fax (718) 332-4661 the design engineers search engine provides actual data instantly at tm notes: 1. performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. electrical specifications and performance data contained herein are based on mini-circuits applicable established test performance criteria and measurement instructions. 3. the parts covered by this specification sheet are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms) ; purchasers of this part are entitled to the rights and benefits contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp. for detailed performance specs & shopping online see web site minicircuits.com if/rf microwave components
features ? high ip3, 24 dbm typ. ? good l-r isolation, 40 db typ. ? good l-i isolation, 26 db typ. ? aqueous washable ? patent pending app lications ? cellular ? gsm ? ism page 2 of 3 level 10 (lo power +10 dbm) 400 to 900 mhz frequency mixer high ip3 outline dimensions ( ) inch mm maximum ratings rev. or m121478 ADE-92LH+ edr-9386/1f2 rav 100729 electrical schematic ADE-92LH+ outline drawing pcb land pattern suggested layout tolerance to be within .002 f f b e max a .01 j ref. index g typ h typ c g typ k typ l d typ demo board mcl p/n: tb-03 suggested pcb layout (pl-052) electrical specifcations typical performance data frequency conversion isolation isolation vswr vswr ip3 (mhz) loss l-r l-i rf port lo port (dbm) (db) (db) (db) (:1) (:1) lo lo lo lo lo lo rf lo +10dbm +10dbm +10dbm +10dbm +10dbm +10dbm 400.10 470.10 6.20 40.91 29.23 1.96 23.19 19.62 420.10 490.10 6.13 41.31 29.59 1.97 21.89 19.85 460.10 530.10 6.09 41.99 29.79 2.03 18.94 20.67 500.10 570.10 6.09 42.30 29.06 2.15 15.20 22.3 520.10 590.10 6.08 42.21 28.27 2.18 13.20 22.9 540.10 610.10 6.14 41.80 27.41 2.21 11.41 23.42 580.10 650.10 6.34 40.68 26.00 2.39 8.37 25.68 600.10 670.10 6.42 39.89 25.43 2.49 7.13 27.57 620.10 690.10 6.51 39.15 24.94 2.58 6.08 28.71 640.10 710.10 6.64 38.42 24.58 2.62 5.23 28.63 680.10 750.10 6.82 37.37 24.21 2.79 4.05 28.3 700.10 770.10 6.95 37.26 24.10 2.91 3.65 26.13 740.10 810.10 7.17 37.77 24.14 2.98 3.21 24.34 760.10 830.10 7.29 38.66 24.35 3.04 3.13 25.79 780.10 850.10 7.33 39.66 24.66 3.06 3.12 29.27 800.10 870.10 7.33 39.87 25.06 3.02 3.17 28.2 840.10 910.10 7.51 39.14 25.81 3.07 3.37 28.53 860.10 930.10 7.63 38.82 25.96 3.18 3.51 28.36 880.10 950.10 7.71 38.55 25.93 3.26 3.66 27.7 900.10 970.10 7.84 38.38 25.96 3.31 3.83 27.45 case style: cd636 price: $ 5.45 ea. qty. (10-49) + rohs compliant in accordance with eu directive (2002/95/ec) the +suffx has been added in order to identify rohs compliance. see our web site for rohs compliance methodologies and qualifcations. a b c d e f g .272 .310 .220 .100 .162 .055 .100 6.91 7.87 5.58 2.54 4.11 1.40 2.54 h j k l wt .030 .026 .065 .300 grams 0.76 0.66 1.65 7.62 .25 1. trace width is shown for rogers ro4350b with dielectric thickness .030" .002"; copper: 1/2 oz. each side. for other materials trace width may need to be modified. 2. bottom side of the pcb is continuous ground plane. notes: denotes pcb copper layout with smobc (solder mask over bare copper) denotes copper land pattern free of solder mask 1 db comp.: +14 dbm typ. frequency (mhz) conversion loss (db) lo-rf isolation (db) lo-if isolation (db) ip3 at center band (dbm) lo/rf if f l -f u x max. typ. min. typ. min. typ. 400-900 dc-150* 6.8 0.1 9.5 40 31 26 18 24 operating temperature -40c to 85c storage temperature -55c to 100c rf power 100 mw if current 40 ma permanent damage may occur if any of these limits are exceeded. pin connections lo 6 rf 3 if 2 ground 1,4,5 * conversion loss increases up to 10db @ if frequency 120-150mhz. rf if lo matching network matching network fet quad iso 9001 iso 14001 as 9100 certified mini-circuits ? p.o. box 350166, brooklyn, new york 11235-0003 (718) 934-4500 fax (718) 332-4661 the design engineers search engine provides actual data instantly at tm notes: 1. performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. electrical specifications and performance data contained herein are based on mini-circuits applicable established test performance criteria and measurement instructions. 3. the parts covered by this specification sheet are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms) ; purchasers of this part are entitled to the rights and benefits contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp. for detailed performance specs & shopping online see web site minicircuits.com if/rf microwave components
page 3 of 3 performance charts ADE-92LH+ ADE-92LH+ conversion loss 5.6 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 400 500 600 700 800 900 rf frequency (mhz) conversion loss (db) lo=+7dbm lo=+10dbm lo=+13dbm at if freq of 70mhz ADE-92LH+ l-r isolation 35 37 39 41 43 45 47 49 51 400 500 600 700 800 900 lo frequency (mhz) isolation (db) lo=+7dbm lo=+10dbm lo=+13dbm ADE-92LH+ l-i isolation 22 24 26 28 30 32 34 36 38 400 500 600 700 800 900 lo frequency (mhz) isolation (db) lo=+7dbm lo=+10dbm lo=+13dbm ADE-92LH+ rf vswr 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 400 500 600 700 800 900 rf frequency (mhz) vswr lo=+7dbm lo=+10dbm lo=+13dbm ADE-92LH+ lo vswr 2 6 10 14 18 22 26 30 34 400 500 600 700 800 900 lo frequency (mhz) vswr lo=+7dbm lo=+10dbm lo=+13dbm ADE-92LH+ if vswr 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0 30 60 90 120 150 if frequency (mhz) vswr lo=+7dbm lo=+10dbm lo=+13dbm ADE-92LH+ ip3 10 15 20 25 30 35 40 45 50 400 500 600 700 800 900 rf frequency (mhz) ip3 (dbm) lo=+7dbm lo=+10dbm lo=+13dbm iso 9001 iso 14001 as 9100 certified mini-circuits ? p.o. box 350166, brooklyn, new york 11235-0003 (718) 934-4500 fax (718) 332-4661 the design engineers search engine provides actual data instantly at tm notes: 1. performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. electrical specifications and performance data contained herein are based on mini-circuits applicable established test performance criteria and measurement instructions. 3. the parts covered by this specification sheet are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms) ; purchasers of this part are entitled to the rights and benefits contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp. for detailed performance specs & shopping online see web site minicircuits.com if/rf microwave components
|
